Hi All,
Could someone please advise me what position the switch at the input on the rear of my Zoom G3 should be "Active" or "Passive"
It is loaded with EFTP.
Thanks in advance,
Jim
alanbakewell wrote:Hi Jim,
Mine's loaded with Ross Hall's patches. I assume that's what you mean.
It's set to "Passive".
Cheers, Alan.
Iain_P wrote:I'm not a six-stringer, but in my four-string world "active" means the guitar needs batteries and delivers a higher level of signal, while "passive" applies when it doesn't and doesn't. I'd expect Strats and Marvins to be passive.
jimuc wrote:Hi All,
Could someone please advise me what position the switch at the input on the rear of my Zoom G3 should be "Active" or "Passive"
It is loaded with EFTP.
Thanks in advance,
Jim
shadowtonio wrote:hello Jim,
see this,,,,,,,,,,,or look into the manual,
http://www.thegearpage.net/board/index. ... e.1197855/
cheers, tonio
Users browsing this forum: No registered users and 9 guests