Arriving at correct bridge location for a Telecaster

Hints and tips on getting the sound you want.
Includes anything to do with Fender, Burns and other guitars; playing techniques;
also amps, effects units, recording equipment and any other musical accessories.

Re: Arriving at correct bridge location for a Telecaster

Postby stephen » 19 Jul 2014, 18:13

Hello Van,

Do you mean what Fender termed as 'White Blonde'? It's also one of my favourite Fender colours. Recently bought a Japanese built Tokai 'Mary Kaye' Stratocaster in that configuration. Photo will follow.....

Stephen.
stephen
 

Re: Arriving at correct bridge location for a Telecaster

Postby stephen » 20 Jul 2014, 12:27

Van, this is my Japanese Tokai 'Mary Kaye' guitar in White Blonde. Was this the colour you referred to on that Shadows LP? (excuse the slight blurriness of the photo. Was taken hand-held in natural light at low shutter speed)

Stephen.
Attachments
tokai mary kaye.jpg
(486.54 KiB) Downloaded 3957 times
stephen
 

Re: Arriving at correct bridge location for a Telecaster

Postby negninegaw » 22 Jul 2014, 23:03

It might be called white blonde; but in my memory it looks somewhat more yellowish.
It must be an old standard colour for a Telecaster.
It should not look like the skin of a dead person, though.
negninegaw
 

Re: Arriving at correct bridge location for a Telecaster

Postby negninegaw » 22 Jul 2014, 23:11

Shadows-same-61.jpg
Shadows-same-61.jpg (15.77 KiB) Viewed 7268 times


The white pickguard should have enough contrast with the body colour,
so the colour should not be too pale...
The paint was probably not too transparent.
There must be at least a few people here, that know everything about this colour.
negninegaw
 

Re: Arriving at correct bridge location for a Telecaster

Postby stephen » 23 Jul 2014, 11:22

Van, Having looked at the picture of the LP that you posted, the colour of Bruce's Telecaster is NOT the White Blonde that I referred to. It would just have been plain-and-simple Blonde! Apparently, the more yellowed, 'butterscotch' colour of the pre-1954 guitars was succeeded post '54 by a creamier colour which over the years, morphed into an 'off-white' shade as the standard Blonde finish. These different shades result from a combination of factors including type of lacquer used, the way the finish was applied, ageing etc.

Stephen.
stephen
 

Re: Arriving at correct bridge location for a Telecaster

Postby negninegaw » 23 Jul 2014, 17:09

buttersc2.jpg
(64.95 KiB) Downloaded 3919 times
buttersc.jpg
yek!
buttersc.jpg (7.38 KiB) Viewed 7248 times
Obviously you have already done your colour research,
but I found a picture of a "butterscotch" tele that looks like the colour that I prefer
(like on the first LP); so maybe that is what you meant in the first place.
I utterly despise the more brownish butterscotch colour, which looks like a sweet with a lot of sugar in it.
even more so with the extra gloss. But who am I...
negninegaw
 

Re: Arriving at correct bridge location for a Telecaster

Postby RUSSET » 25 Jul 2014, 06:56

I have a Squier Classic Series '50s Tele which is described as 'Vintage Blonde'. It's the one with a Black scratchplate, although I have replaced mine with a White one. It is very faintly transparently showing the grain through the finish, & the colour is more like a creamy Olympic White than the definate yellow shown on the picture above. It's an excellent guitar, by the way.

Tony.
RUSSET
 

Previous

Return to Guitars and Gear

Who is online

Users browsing this forum: No registered users and 14 guests

Ads by Google
These advertisements are selected and placed by Google to assist with the cost of site maintenance.
ShadowMusic is not responsible for the content of external advertisements.


cron