Quite by coincidence, we just took delivery of a new NOS 1956 “teambuilt” Customshop Stratocaster. From the certificate, it was built in 2010. It is finished in three-tone sunburst, with a soft V neck and 3-way switch. We asked the dealer (Music Gallery in Chicago) to fit it with fat Thomastic-Infield flatwounds with a wound third.

As I understand it, the guitar is representative of the 1956 – 59 model run, rather than a straight ’56 model. It has the alder body introduced in 1956, rather than the ash of the previous (the first) model, plus the flat string tree, correct pickguard, oval back-plate holes, etc. The 3-tone sunburst was introduced in mid-1958, so this guitar is representative of a late model of that series. Hank’s (Cliff’s) first Strat would have been to this spec, I think, except for the Fiesta red, gold hardware, and fancy neck.
In mid-1959, Fender of course changed over to the rosewood fretboards.
This is a light guitar and noticeable lighter than the clear-coated, natural-finish American Series Strat workhorse that I use for practice and jams. I understand unpainted guitars, where the grain shows through, are usually made of ash, but understand also that ash and alder can weigh the same or be lighter than the other, depending on the wood itself.
Anyway, we bought this for the Ventures’ section of a planned show. We already have a masterbuilt sunburst ’59 Jazzmaster and our bassist Anna Treichler has a sunburst Precision bass, a 60th anniversary model, shown on her avatar, so not quite period, but it sounds the part.
Don Wilson’s first Stratocaster, which he traded in later, must have looked like this, with an all-maple neck. We hope it nails the sound. At least our guitars will look the part.
The trouble with covering the Ventures is that our guitar combination will probably be correct only for perhaps not more than 15 Ventures pieces, the earliest ones where Bob Bogle played lead. Anyway, we have yet to practice with this Stratocaster and can't wait to hear how it sounds in the mix.
Andy