The ShadowMusic Web Community

Just wondering what screws need to be removed to get into the back and change the valve. There are 6 large screws (& 2 on the top) nearer to the centre and a further 7 slightly smaller ones round the outer edge. Any help would be appreciated.

Anyone?

Hi Alan
Try This Link
http://www.tdpri.com/forum/amp-owners-clubs/171536-vox-ac4tv-32.html
Looks Like The Small outside srews on the Back and The 2 Screws on the top have to be removed
regards jay

Yes I remember now thanks to Jay's posting. The amp is fastened to the back and the two top screws and the outside screws on the back need to be removed, leaving two screws holding the back to the amp, you prize the back away from the cabinet and the whole thing comes away - careful as it's heavy-ish.

Thanks.

AlanMcKillop wrote:Just wondering what screws need to be removed to get into the back and change the valve. There are 6 large screws (& 2 on the top) nearer to the centre and a further 7 slightly smaller ones round the outer edge. Any help would be appreciated.

Careful now Alan............

Remember what happened last time you took the back off an amp

As Dave says it's surprisingly heavy when you pull it away from the case & don't forget the speaker wire.

Dick.